Sets width of the table.
SetTableWidth(mode as Einhugur.Word.TableWidthModes,
unit as Einhugur.Word.Units,
value as Double)
Parameters
- mode
- The mode for the width.
- unit
- Unit for the value to set. This parameter is ignored when the mode is Auto or Percentage.
- value
- The value to set. This parameter is ignored when mode is set as Auto. When mode is set as Percentage the value should be in the range from 0.0 to 1.0. When mode is set to Absolute then it will go by the setting in the unit parameter.